VIPSTARCOIN wiki

- I wanna be a VIPSTAR -

ユーザ用ツール

サイト用ツール


wiki:pc_wallet

差分

このページの2つのバージョン間の差分を表示します。

この比較画面にリンクする

両方とも前のリビジョン 前のリビジョン
次のリビジョン
前のリビジョン
最新のリビジョン 両方とも次のリビジョン
wiki:pc_wallet [2019/06/17 21:16]
warashi
wiki:pc_wallet [2021/04/14 23:01]
warashi [同期が進まない場合]
行 1: 行 1:
 ====== PCウォレット導入 / PC Wallet setting ====== ====== PCウォレット導入 / PC Wallet setting ======
-This page contains Japanese and English sections. +
 ---- ----
 このページではウォレットの導入とバックアップ手順を説明します。 このページではウォレットの導入とバックアップ手順を説明します。
行 6: 行 6:
 ※PCウォレットは同期に時間がかかります。 ※PCウォレットは同期に時間がかかります。
 すぐ作りたい方やスマホをご利用の方は[[wiki:android_wallet|Android版]]か[[wiki:web_wallet|web版]]をご利用下さい。\\ すぐ作りたい方やスマホをご利用の方は[[wiki:android_wallet|Android版]]か[[wiki:web_wallet|web版]]をご利用下さい。\\
 +※現在webウォレットとAndroidウォレットの作成者と連絡がついておりません。
 +すぐ作りたい方やスマホの方はもにゃウォレットを、またはElectrum Walletを推奨します。
 +https://monya-wallet.github.io/
 \\ \\
 \\ \\
行 36: 行 39:
  
 解凍後VIPSTARCOIN-qt.exeを任意の場所に保存し起動します。初回起動時のみデータフォルダの設定場所の確認が行われます。\\ 解凍後VIPSTARCOIN-qt.exeを任意の場所に保存し起動します。初回起動時のみデータフォルダの設定場所の確認が行われます。\\
-設置場所に特に問題がなければ「初期値のデータディレクトリ」を選択することをお勧めします。\\ 
-初回起動時、ウォレットは各種設定ファイルを自動で作成します。\\ 
 \\ \\
 After extracting the zip file, save the folder containing VIPSTARCOIN-qt.exe to any location. Then launch wallet. The data folder setting location is checked only wallet is launched for the first time.\\ After extracting the zip file, save the folder containing VIPSTARCOIN-qt.exe to any location. Then launch wallet. The data folder setting location is checked only wallet is launched for the first time.\\
-You can choose the install folder here, but we strongly recommend not to change from the default folder for avoiding taking extra steps to install the program.\\  
 \\ \\
  
 {{ :wiki:appdata.jpg?nolink&400 |}} {{ :wiki:appdata.jpg?nolink&400 |}}
 +
 +
 +設置場所に特に問題がなければ「初期値のデータディレクトリ」を選択することをお勧めします。\\
 +初回起動時、ウォレットは各種設定ファイルを自動で作成します。\\
 \\ \\
 +You can choose the install folder here, but we dtrongly recommend not to change from the default folder for avoiding taking extra steps to install the program.\\ 
 \\ \\
-Windowsファイアウォールのセキュリティ警告が表示された場合は、VIPSTARブロックチェーンに接続できるように「アクセスを許可」ボタンをクリックしてください。\\ +これでウォレットのインストールは完了です。ウォレットはネットワークと同期を開始し、使用可能な状態になります。同期が完了したならば、同期データを保存するためにウォレットのファイルメニューから終了を選択してウォレットを停止させます。この時、同期されたデータが保存されますので次回起動時には保存されたデータが読み込まれ起動時間を大幅に節約する事ができます。\\
-プライベート、パブリックネットワークの選択は、自分が使用している物を選択んでください。\\ +
-\\ +
-If Windows Firewall security alert dialog popped up, press "Allow access" button so that you can connect to the VIPSTAR blockchain. \\ +
-For private and public network selection, select the one you are using.\\ +
-\\ +
-{{ :wiki:firewall.jpg?400 |}} +
-\\ +
-\\ +
-\\ +
-これでウォレットのインストールは完了です。ウォレットは自動的にスタートしてネットワークと同期を開始し、使用可能な状態になります。\\ +
-もし同期が完了しない場合はファイアーウォールがネットワーク接続を妨げてないか確認してください。\\ +
-同期が完了したならば、同期データを保存するためにウォレットのファイルメニューから終了を選択してウォレットを停止させます。この時、同期されたデータが保存されますので次回起動時には保存されたデータが読み込まれ起動時間を大幅に節約する事ができます。\\+
 初回の同期完了には長い時間が必要です。取引は同期が完了してから行ってください。\\ 初回の同期完了には長い時間が必要です。取引は同期が完了してから行ってください。\\
  \\  \\
-After the installation completed, the program will automatically start, and you will see the screen above.\\ +Socompletes the wallet installation. The wallet will start syncing with the network and be ready for use.\\ 
-You need to wait for wallet program to finish synchronizing the up-to-date blockchain information through the network.\\  +When the sync is complete, stop the wallet by choosing Exit from the wallet's File menu to save the sync data.\\ 
-If the progress bar at the bottom of wallet window does not changeor reach the completion, please confirm that firewall program does not Inhibit  to connect VIPS network.\\  +At this time, the synchronized data is saved, so the saved data will be read at the next startupand the startup time can be greatly saved.\\ 
-When the synchronization compleated, the warning message will automatically disappear.\\+It takes a long time to complete the first synchronization. Please wait until the synchronization is completed before making a transaction.\\
 \\ \\
-Once synchronization is complete, stop wallet by selecting "Exit" from the wallet "File" menu to save the synchronization data.  At this time, since the synchronized data is saved, the saved data will be read at the next start, which will save the start time significantly.\\ 
-It takes a long time to complete the initial synchronization. Make transactions after synchronization is complete.\\ 
 \\ \\
-\\ 
----- 
  
-==== 2) VIPSTARCOIN.confの設定 / CreateVIPSTARCOIN.conf ==== 
  
 +2)<color blue/lightgrey>VIPSTARCOIN.confの設定</color>
  
-マイニングを行うならウォレットを終了し、以下の要領でVIPSTARCOIN.confを作成します。\\ +もし同期ができない等の問題があるか、マイニングを行うならウォレットを終了し、以下の要領でVIPSTARCOIN.confを作成します。\\ 
-セッティングは必須ではありませんが、作成することでデータ同期が進行しない場合に同期効率を向上させられる場合があります。\\+セッティングは必須ではありませんが、実施することでデータ同期効率を向上させられる場合があります。\\
  \\  \\
-If you wish to do VIPS mining, close the wallet and create VIPSTARCOIN.conf as follows.\\ + 
-Setting is not mandatory, but creating it may improve synchronization efficiency if blockchain synchronization does not progress easily. + 
-\\ +
-\\+
 2) -1 データディレクトリを開く 2) -1 データディレクトリを開く
  
行 112: 行 100:
 作成したVIPSTARCOIN(テキスト)ファイルをメモ帳などで開いて以下のように編集して保存終了します。\\ 作成したVIPSTARCOIN(テキスト)ファイルをメモ帳などで開いて以下のように編集して保存終了します。\\
 <code> <code>
-server=1\\ +server=1 
-rpcallowip=127.0.0.1\\ +rpcallowip=127.0.0.1 
-rpcport=31916\\  +rpcport=31916 
-rpcuser=user\\ +rpcuser=user 
-rpcpassword=pass\\ +rpcpassword=pass 
-addnode=explorer.vipstarcoin.jp\\ +addnode=explorer.vipstarcoin.jp 
-addnode=dnsseed.vipstarcoin.jp\\+addnode=dnsseed.vipstarcoin.jp
 </code> </code>
 \\ \\
行 176: 行 164:
 コピーしたデータは複数のUSBメディアなどに保管してください。\\ コピーしたデータは複数のUSBメディアなどに保管してください。\\
 新しい入金アドレスを作成した時、また100回程度取引を行うと新しい秘密鍵が自動的に生成されますので、新たにバックアップを行うことをお勧めします。 新しい入金アドレスを作成した時、また100回程度取引を行うと新しい秘密鍵が自動的に生成されますので、新たにバックアップを行うことをお勧めします。
 +
 +
 +\\
 +\\
 +==== 同期が進まない場合 ====
 +\\
 +PCウォレット初回起動時に同期が進まずフリーズしたようになる場合があります。\\
 +その場合、以下をお試しください。\\
 +\\
 +\\
 +https://wiki.vipstarcoin.jp/doku.php?id=wiki:sync_trouble
  
  
wiki/pc_wallet.txt · 最終更新: 2022/01/24 23:04 by ねじりん